CERAMIC AND TILE ADHESIVE (WHITE OR GREY)

CERAMIC AND TILE ADHESIVE (WHITE OR GREY)

DESCRIPTION
It is adhesive mortar cement-based C1T class using to adhesive surface coating materials such as ceramic, tile, granite and so on.

APPLICATION AREAS

• Indoor and outdoor surfaces
• In ceramic and tile applications
• In horizontal granite applications
• In glass mosaic applications
• In marble applications

PREPERATION OF PLASTER
25 Kg Turqchem® Ceramic and Tile Adhesive is mixed with 7-7,5 lt. water in a clean can, till it turns into paste form. The mixture in kept for 5 minutes and then mixed again. The mixture can be applied to the gaps with using suitable trowel.

APPLICATION LIMITS

• It is not used on wood surfaces
• It is not used on painted surfaces
• It is not used on metal surfaces
• It is not used on gypsum surfaces

PREPERATION OF SURFACE AND APPLICATION SPECIALITIES

• The surface should be clean and smooth.
• If there is a painted surface, it should be roughened with hammer
• The cranks and holes should be repaired by using Forcechem® Plaster before the application.
• The surface should be moisted before the application.
• It is suggested that the application should be in the range of +5⁰C / +35⁰C
• If it is necessary, rearrangement of applicated places should be done in 25 minutes
• The adhesive has -40 / +100 ⁰C temperature strength

TECHNICAL SPECIFICATIONS

The values above are valid at +21 ⁰C and %50 relative humidity