RAPID CERAMIC AND TILE ADHESIVE

RAPID CERAMIC AND TILE ADHESIVE

DESCRIPTION
It is adhesive mortar cement-based C1FT class, high speed setting adhesion strength, using for adhesion of surface coating materials such as ceramic, tile, granite.

APPLICATION FIELDS

• It is suitable bath indoor and outdoor application surface that desired fast setting and openning to traffic
• It uses for adhering ceramic, granite, natural stone onto old ceramic, concrete, plaster and self leveling screed surfaces

PROPERTIES

• It is adhesive morter which high performance and fast setting
• It is suitable for joint filler application in 24 hr

APPLICATION

• Before application the surface should be clean and smooth
• It should be used Forcechem® Primer Liquid to avoiddust emiission
• The cranks and holes should be repaired by using Forcechem® Ready To Use Plaster before the application
• 25 kg Forcechem® Rapid Ceramic And Tile Adhesive is mixed with 6-7 lt water in a clean can, till it turns into paste form. The mixture is keps for 5 minutes and the mixed again. The Mixture can be applied to the surface with using suitable trowel

WARNING

• It should be applied on small areas because of fast setting properties.
• Coating Material should be applied onto adhesive in 15-20 minutes
• Adhesive mortar has 45-60 minutes pot life
• Joint Filler application can be started after 4-6 hr
• The surface can be opened to traffic after 24 hr

TECHNICAL SPECIFICATIONS

The values above are valid at +21 ⁰C and %50 relative humidity