FORCECHEM GLASS BRICKS ADHESIVE AND JOINT GROUT

urun-cam-tugla-derz-yapis

DESCRIPTION
Cement based and aggregate with polymer modified flex mortar and joint filler.

APPLICATION FIELDS
Used in various sizes and colors of decorative glass and brick bonding and joints

PREPARATION OF ADHESIVE AND USAGE
1 Bag (25 kg) Forcechem® Glass Bricks Adhesive and Joint Grout is mixed with 6-7 lt water until it turns paste form. (Hand mix with mixer gives beter results.) The mixture is left to rest for 5 minutes, then mixing again. Mortar can be used by appropriate trowel applied on glass bricks.

APPLICATION LIMITS
Be directly not applied to the wood, painted, wet surfaces and metal surfaces.

PREPERATION OF SURFACE AND APPLICATION SPECIALITIES

The surface should be clean.
It is suggested that the application should be in the range of +5⁰C / +35⁰C
It is suggested that the application should not be under direct sun light
If it is necessary, rearrangement of applicated pieces should be done in 25 minutes
It should be wear gloves and protective clothes while application

Color	White or Grey
Partical Size	<0,2 mm.
Resistance to Abrasion	≥ 2000 mm³
Flexural Strength After 28 Days	≥ 2,5 N/mm²
Flex. Str. After Frost-Thaw Cyc. Con.	≥ 2,5 N/mm²
Compressive Strength After 28 Days	≥ 15 N/mm²
Compressive Str. After Frost-Thaw Cyc.	≥ 15 N/mm²
Shrinkage	≤ 3 mm/m
Water Absorption	≤5 gr. (30 minutes) / ≤10 gr.(240 minutes)
Digestion time	30-40 minutes
Cleaning time	15-20 minutes
Ready Mixture Curing Time:	1,5 hour
Fire Response Class	A1
Application Temperatures	+5⁰C / +35⁰C
Strenght of Freeze	-40⁰C / +100⁰C
Toxity	Non Toxic
Consumption	17-18 kg/m² – 24 brick
Package	25 kg craft package
Mixing Ratio	25 kg powder / 6-7 lt. water
Storage Life	12 months in suitable storage conditions It must be closed carefully when it will not be use and it has to be used 1 weeks it is opened