CEMENT BASED READY TO USE PLASTER

CEMENT BASED READY TO USE PLASTER

DESCRIPTION
Cement based, polymer reinforced, containing less then 1,8mm agrega, thin ready to use that can be applied as single coat

PREPARATION OF PLASTER
25 kg Forcechem® Cement based ready to use plaster is mixed with 7,5 lt water with a mixer or by hand until it gets mastic thickness.After reting the preparation for 5 minutes, it is ready to use. Preparation is applied on to surface y trowel and then its leveled to obtain smooth surface. Since it is a thin plaster, its possible to obtain smooth surface at one time.

RANGE OF APPLICATION

• It used for plastering on brick, gas concrete, concrete, gross concrete surfaces
• It is usedto repair breaks, cracks and holes on the surfaces

APPLICATION LIMIT

• It can not be applied to metallic surface
• For using on wooden and timber surfaces, plaster netting should be used.

PREPERATION OF SURFACE AND APPLICATION SPECIALITIES

• The surface where plaster is to be applied should be moisted.
• The cranks and holes should be repaired before the application.
• Painted surfaces should be purified from the paints
• It is necasary to use plaster stirrings on polystrene insulation boards
• It is suggested that the application should be in the range of +5⁰C / +35⁰C
• Plastered surfaces should be cured with water

TECHNICAL SPECIFICATIONS

The values above are valid at +21 ⁰C and %50 relative humidity