FLEX-S GRANITE ADHESIVE (WHITE OR GREY)

FLEX-S GRANITE ADHESIVE (WHITE OR GREY)

DESCRIPTION

It is adhesive mortar C2TS1 class that is cement-based and polymer resin reinforced contained hard aggregate, water proof, high elasticity and adhesion strength.

APPLICATION AREAS

• Indoor and outdoor surfaces, in ceramic and tile applications
• In horizontal and vertical granite applications
• In glass and porcellain mosaic applications
• In marble applications, in swimming pools
• In the surfaces here elasticcity is necessary

PREPERATION OF PLASTER

25 Kg Forcechem® Flex-S Granite Adhesive is mixed with 7-7,5 lt. water in a clean can, till it turns into paste form. The mixture in kept for 5 minutes and then mixed again. The mixture can be applied to the gaps with using suitable trowel.

APPLICATION LIMITS

• It is not used on wood surfaces

PREPERATION OF SURFACE AND APPLICATION SPECIALITIES

• The surface should be clean and smooth.
• If there is a painted surface, it should be roughened with hammer
• The cranks and holes should be repaired by using Forcechem Plaster before the application.
• The surface should be moisted before the application.
• The adhesive can stay ready to use in the can about 4 hr.
• If it is necessary, rearrangement of applicated places should be done in 25 minutes

TECHNICAL SPECIFICATIONS

The values above are valid at +21 ⁰C and %50 relative humidity