GLASS MOZAIC ADHESIVE

GLASS MOZAIC ADHESIVE

DESCRIPTION
It is adhesive mortar C1TE class, cement-based, with polymer additive, using for adhesion of great and little sized glass mosaic and ceramics.

APPLICATION FIELDS

• Indoor and outdoor surfaces
• In glass mosaic applications
• In swimming pool applications

PREPERATION OF PLASTER
25 Kg Forcechem® Glass Mozaic Adhesive is mixed with 8 kg. water in a clean can, till it turns into paste form. The mixture in kept for 5 minutes and then mixed again. The mixture can be applied to the gaps with using suitable trowel.

APPLICATION LIMITS

• It is not used on wood surfaces
• It is not used on painted surfaces
• It is not used on metal surfaces
• It is not used on gypsum surfaces without using primer

PREPERATION OF SURFACE AND APPLICATION SPECIALITIES

• The surface should be clean and smooth.
• If there is a painted surface, it should be roughened with hammer
• The cranks and holes should be repaired by using Forcechem® Plaster before the application.
• The surface should be moisted before the application.
• It is suggested that the application should be in the range of +5⁰C / +35⁰C
• The adhesive can stay ready to use in the can about 6 hr.
• The adhesive has 40-60 min open time with respect to the climate conditions.
• If it is necessary, rearrangement of applicated places should be done in 25 minutes
• The strenght of the adhesive is >0,7 mpa

TECHNICAL SPECIFICATIONS

The values above are valid at +21 ⁰C and %50 relative humidity