FORCEPRIMER AAA PRIMER FOR INCREASING ADHERANCE AND SURFACE FORMATION IN WALLS AND CEILINGS

forceprimer

DESCRIPTION
It is an acrylic dispersion-based one component primer to be formed notehed surface for wall and ceiling surfaces.

APPLICATION AREAS

Indoor and outdoor places, horizontal and vertical claddings
As an adherence increaser before ceiling plaster and gypsum plaster applications
To surface creating before covering that will be applied on ceramic, granite or natural
rock
To surface creating before covering that will be applied on gypsum, gypsum panel or drywall

POINTS TO CONSIDER

Application under sunlight and strong winds should be avoided. Application must be done when the surface temperature is between +5°C and +25°C.
It cannot be applied on bitumen, painted and metal surfaces.
The material must be protected from freeze at all times.
10-15% water by weight can be added before application.
It should not be applied if there is a chance of freeze within the next 24 hours. It should not be used humid environments such as Turkish baths, saunas, and swimming pools.
During application, Forcechem® Forceprimer AAA should be mixed from time to time.
Forcechem® Forceprimer AAA has a filled and sandpaper-like appearance once it is dry.
Using protective gloves during application. For further information, please look up the material safety data sheet.

ADVANTAGES

It is one component, and easy to prepare and apply.
It does not contain solvents.
In increases adhesion especially in absorbing and slippery surfaces.
Forcechem® Forceprimer AAA increases the drying and working time on the cement based mortar.
In wood coatings, it protects from humidity.
It can be used in internal and external surfaces.

SURFACE PREPARATION
The surface that the product will be applied on must be clean smooth and cleaned from paint, rust, oil and paraffin. It is important that it is scaled to the surface. The coatings must be checked before the application. The broken and loose ones must be replaced and the surface must be completely filled with a cement based repair mortar or crude mortar. Varnish, wax and other materials on wood and parquet must be scraped off.

CONSUMPTION
300-350 gr/m²

TECHNICAL SPECIFICATIONS

Appearance	Green
Contents of Material	Acrylic copolymer resin-based liquid
pH	7,0-9,0
Solid Content	%15-20
Application Thickness	0,4 mm
Density	~1,60 kg/l
Thermal Resistance	-20⁰C / +80⁰C
Drying Period	4 hours (Varies depending on ambient temperature and humidity)
Time required for other applications	24 hours
Storage life	12 months in suitable storage conditions It must be closed carefully when it will not be use and it has to be used in 1 weeks it is opened

The values above are valid at +21 ⁰C and %50 relative humidity