FLEX POOL ADHESIVE

FLEX POOL ADHESIVE

DESCRIPTION
It is adhesive mortar cement-based, polymer reinforced, C2E class providing water proofing with high elasticity used for adhesion of ceramic, marble, granite, glass, mosaic and similar materials to pools or similar wet floors.

APPLICATION FIELDS

• Exterior and interior construction
• In horizontal and vertical coatings.
• On rough surfaces, after lining to rough surfaces.
• On plaster surfaces, after lining to plaster surfaces.

USAGE OF THE PRODUCT
One bag of (25 Kg) Flex Pool Adhesive is added slowly into 6,5-7 kg. water then is mixed slowly with mixer until no precipitation occors. The prepared mixture is left to rest for 2 minutes and then mixed again, after mixing; mixture is applied to the surface with a toothed trowel. Coating material should be applied on to surface within 25 min.

APPLICATION LIMITS

• Should not be applied on wooden and metal surfaces
• Should not be applied on painted surfaces.

PREPERATION OF SURFACE AND APPLICATION SPECIALITIES

• The surface should be clean and smooth. İf there is a painted surface.
• İt should be roughened with hummer.
• The cranks and holes should be repaired by using Forcechem® Repairing Mortar before the application.
• The surface should be moisted before the application.
• İt is suggested that the application should be in the range of +5⁰C / +35⁰
• The adhesive can stay ready to use in the can about 4-5 hour.
• The adhesive has 40-60 min open time with respect to the climate conditions.
• İf it is necessary, rearrangement of applicated places should be done in 25 minutes.

TECHNICAL SPECIFICATIONS

The values above are valid at +21 ⁰C and %50 relative humidity