English
German
Russian
TurkishUV RESISTANT DOUBLE COMPONENT WATER ISOLATION MORTAR
UV RESISTANT DOUBLE COMPONENT WATER ISOLATION MORTAR
DESCRIPTION
This is cement based UV Resistant Double Component Water Isolation Mortar, applied inside and outside against leaking surface waters, with capillary effect, containing chemical additives with special particle size mineral aggregate and chemical additives increasing product performance.
APPLICATION AREAS
This can be used in terrace balcony, foundation concrete and water insulations, water tanks, tunnels, retaining walls, in vertical and horizontal applications of interior and exterior spaces.
ADVANTAGES
Easy preparation and application. Ensures desirable working time. No slipping in vertical applications. High adhesion feature. Resistant to frost and dissolution cycle. Applicable with brush and trowel. Ensures complete water insulation by filling capillary gaps due to crystallization. Protects the concrete and fitting from water corrosion.
USAGE
Prior to beginning application process, remove foreign materials from the surface and soak it. Open small holes to increase adherence on the surface. Application surface must be saturated with water one day in advance and application must be done while it is damp. Slowly pour 25 kg component A, B component into 10 kg liquid and mix with low speed mixer or trowel until achieving a homogenous mixture. Leave aside for 5 minutes and mix again for 1 minute. Mix again. Make the corner joint sections of spaces round. Apply with brush or trowel on pre-damped surface. If hardening is achieved on first coat without dehydrating and crystallization, the second coat is applied. This period is 4-5 hours depending on ambient temperature. Adhesion process must be completed within 20-25 minutes. No application should be made at temperatures below +50C and above 350C. The spaces with this application must be put into use/service or making coating after 3-7. These values are valid for 200C surface and ambient temperature. Time diminishes at higher temperatures and increases at lower temperatures.
TECHNICAL SPECIFICATIONS
| Appearance | Component A: Gray ComponentComponent B: White liquid |
| Mix Ratio | 25kg powder /10 kg liquid |
| Consumption Amount | 2 kg /m2 (for thickness of 1 mm) |
| Application Temperature | Between +50C and +350C |
| Waiting Time Between Layers | 5-6 hours |
| Full Congealing Time | 21 days |
| Toxicity | Non-toxic |
| Water Tightness | 6 bar |
| Service Time | 3-7 days |
| Adhesion Strength | >1.5 N/mm2 |
| Storage And Shelf Life
|
In its unopened original package, stock up maximum 2 pallets on each other in a cool and dry place. Shelf life is 12 months from date of production under proper storage conditions. |
The values above are valid at +210C and 50% relative humidity.
