FORCECHEM ADR ADDITIVE PERFORMANCE ENHANCING LIQUID ADDITIVE FOR CEMENT BASED PRODUCTS

FORCECHEM ADR ADDITIVE PERFORMANCE ENHANCING LIQUID ADDITIVE FOR CEMENT BASED PRODUCTS

DESCRIPTION
It is resin-based liquid admixture of cement that increases the resistance, waterproofing and flexibility for cement-based mortars. It is a liquid mixture that its’ chemical composition carries out cement hydration, affects cement compounds and increases the yield.

APPLICATION AREAS

• Inside and outside places, horizontal and vertical claddings
• Ceramic, ceramic tile, granite, glass mosaic cementing and as a dopant for applications that made on ceramic
• In swimming pool cementing, waterproofing needed roofs, dopant for thermal insulation panel cementing
• As a dopant for self-levelling mortars, repairing mortars, cladding of surfaces that are suitable for contraction and cracking
• As a dopant before repairing to protect the concrete structure
• As a plaster on surfaces

POINTS TO CONSIDER

• It cannot be applied on wood, OSB, PVC, bitumen surfaces, painted and metal surfaces.
• It should not be used on surfaces that may freeze in 24 hours.
• Application under direct sunlight and strong winds should be avoided. Application must be done when the surface temperature is between +5°C and +25°C. After applying on external surfaces, the surface should be protected from sunlight, rain, wind and freeze for 24 hours. After applying on the surface, the surface should be protected from warm, dry and windy environments for 24-48 hours and from quick drying by wet bags or water.
• If used as a p by diluting with water, the material becomes transparent after drying. If pressed upon with a finger, it will give a feeling of stickiness.
• Forcechem® Adr Additive, shortens the life of cement mortar due to its chemical properties as additive.
• Using protective gloves during application is recommended. For further information, please obtain the material safety data sheet from the manufacturer.

ADVANTAGES

• It forms a strong bond with concrete.
• It provides adherence and impermeability.
• It has high freeze-thaw resistance.
• It increases the deflexion and compressive strength of mortar.
• It increases the adherence strength of the mortar.
• It can be used as primer when it watered down (see. Forcechem® Primer Liquid advantages)
• It adds a high elastic property.

SURFACE PREPARATION
According to using materials, the surface preparation should be done beforehand. Generally, the cement surfaces should be cleaned from dust, oil, etc. that would obstruct a clean and sturdy mortar application. The broken and loose pieces on the using surface should be cleared away and repaired quickly.

USAGE
Forcechem®  Adr Additive is mixed together with cement based adhesive mortar, plasters, repairing mortar, joint filler and floor screed at recommended mixture ratios according to required application.. In flexible grouting applications mixture ratio depends on worker’s skill. The mixture ratios shall not be outside of the mixture amount. Otherwise it will show performance reducing effect instead of performance enhancing affect.

TECHNICAL SPECIFICATIONS

The values above are valid at +21 ⁰C and %50 relative humidity