THERMAL INSULATION BOARD ADHESIVE

isi-yalitim-levha-yapistiricisi

DESCRIPTION
Cement based and high polymer modified adhesive for polystyrene insulation boards.

APPLICATION AREAS

Indoor and outdoor surfaces
In polystyrene insulation board applications
In insulation coating applications

PREPERATION OF PLASTER
1 bag of (25 Kg) Turqchem® Thermal Insulation Board Adhesive is mixed with 6,5-7 lt. water in a clean can, till it turns into paste form. The mixture in kept for 5 minutes and then mixed again. The mixture can be applied to the gaps with using suitable trowel.

APPLICATION LIMITS

It is not used on metal surfaces

PREPERATION OF SURFACE AND APPLICATION SPECIALITIES

The surface should be clean and smooth.
The cranks and holes should be repaired by using Turqchem® Plaster before the application.
The surface should be moisted before the application.
It is suggested that the application should be in the range of +5⁰C / +35⁰C

TECHNICAL SPECIFICATIONS

Color	Grey
Determination of Air Content of Fresh Mortar	≥ 1000 kg/m³
Partical Size	< 0,8 mm.
Flexural Strength	≥ 2,0 N/mm²
Compressive Strength	≥ 6,0 N/mm²
First Strenght Of Adhesion	≥ 0,5 N/mm²
Thermal Insulation Board of Adhesion	≥ 0,08 N/mm²
Water Absorption	≤5 gr.(30 min) / ≤10 gr. (240 min)
Application time	40-60 minutes
Ready Mix Applicable	6 hour
Fire Response Class	A1
Opening to the Traffic	24 hour
Application Temperatures	+5⁰C / 35⁰C
Strenght of Freeze	-40⁰C / 100⁰ C
Toxity	Non Toxic
Consumption	3-5 kg/m²
Package	25 kg craft packet
Mixing Ratio	25 kg powder / 6,5-7 lt. water
Storage Life	12 months in suitable storage conditionsIt must be closed carefully when it will not be use and it has to be used 1 weeks it is opened

The values above are valid at +21 ⁰C and %50 relative humidity