MINERAL PLASTER

MINERAL PLASTER

DESCRIPTION
Cement based, drop type, 1,6-1,8 mm (thin), 2,5-3 mm (thick) aggregate size and polymer modified decorative plaster that can be used with trowel to obtain a uniform layer.

APPLICATION AREAS
İt can be applied to outside cement-based plaster,gas concrete and exposed concrete and especially onto heat insulation system as a last coating

PREPARATION OF PLASTER
25 kg Forcechem® Mineral Plaster is mixed with 5,5-6 lt water in a clean can. The mixture is keps for 5 minutes and the mixed again. The Mixture can be applied to the surface with using trowel. Plaster must be applied to surface in equal thickness with using trowel and application thickness must be regulated with respect to biggest aggregate in mixture. Users have to make circular motion on plaster to give shape and design.

APPLICATION LIMITS

• It is not used metal surface, weak plaster surface and brick surface.

PREPERATION OF SURFACE AND APPLICATION SPECIALITIES

• The surface where plaster is to be applied should be clean, smooth and strong.
• The surface where plaster is to be applied should be moistened before application and saturated with water in very hot and windy air
• The surface where plaster is to be applied should be +5⁰C / +35⁰C
• The surface where plaster is to be applied can be used lining in order to increase adhesion property

TECHNICAL SPECIFICATIONS

The values above are valid at +21 ⁰C and %50 relative humidity