REPAIRING MORTAR (THIN OR THICK)

REPAIRING MORTAR (THIN OR THICK)

DESCRIPTION
It is a thin and R1 class cement based, polymer reinforced, single component smoothing mortar that is used for removal of surface defects.

APPLICATION FIELDS

• Indoor and outdoor surfaces
• For repairing concrete, gas concrete surfaces
• For repairing the cranks of prefabricated concrete species,
• For repairing the waals, ceilings and similiar surfaces,
• For repairing all of the cement based plasters,
• For repairing the cranks of concrete surfaces.

APPLICATION

• The surface should be clean
• Weak surface on concrete should be removed up to get strong surface
• Weak surface on plaster should be removed up to get strong plaster surface
• 25 kg Forcechem® is mixed with 6-7 lt water in a can till it turns into paste form.
• The mixture is keps for 2 minutes and the mixed again.
• It should be applied 1-10mm(Repairing Mortar Thin) thickness layer following one after another
• It should be applied 5-20 mm(Repairing Mortar Thick) thickness layer following one after another

WARNING

• It is not used on metal, gypsum and wood and painted surfaces
• It can be applied until 6mm single layer (first layer)
• Repair morter is resistance to heat, water and frozen
• Before applying the last layer, the first applying later must be dried

TECHNICAL SPECIFICATIONS

The values above are valid at +21 ⁰C and %50 relative humidity.